Provider Manual · Part V

Insurance follow-up

Check claims before sending, bill third insurance, review denial prices, track payer enrollment and prior authorizations, let Billing Hero work insurance problems, appeal denials, and set the rules for failed insurance checks and Medicare claims. The work that needs a person happens in the Billing Queue (Part XXXI).

17 sections~67 min read
V
Part V · continued

Insurance follow-up

Check claims before sending, bill third insurance, review denial prices, track payer enrollment and prior authorizations, let Billing Hero work insurance problems, appeal denials, and set the rules for failed insurance checks and Medicare claims. The work that needs a person happens in the Billing Queue (Part XXXI).

5.18Code-pair & unit checks

Check claim code pairs and units before sending

In Billing → Configuration → Claim Submission, an administrator or staff member with billing-settings permission can configure Check code pairs and units (NCCI and MUE). These checks compare claim coding with Medicare’s practitioner code-pair edits and unit limits. They start off and do not recheck claims already sent to the payer.

ChoiceWhat happens
OffNo code-pair or unit-limit checks.
Warn on the claimFindings appear in Issues & fixes; claims still follow their normal sending schedule.
Hold the claim until it’s fixed or overriddenA claim with an unresolved finding waits for a coding correction or a documented override.

Start with warnings while your team reviews the results. On the claim, open Issues & fixes and review the affected codes and units. Correct the coding when appropriate; use an override only with the required reason and the appropriate billing permission. A finding is not an instruction to add a modifier without supporting documentation.

Claims staff can use Edit Codes for a supported modifier correction or Record override with a reason. Unit and code-removal corrections may require the clinician to amend the visit’s charges and then rebuild the unsent claim.

Global surgery period warning (modifiers 24, 57, 58, 78, 79)

While these checks are not Off, Hero also warns when a visit or procedure falls inside the global period of an earlier surgery the same provider billed for the same patient and the line lacks the modifier that takes it out of the surgery’s package. “That warning never holds a claim,” even in hold mode, and it has no Record override. In Issues & fixes it reads, for example, 99213 on 10/20 is inside the 90-day global period of 27447, and explains which modifier fits:

  • A visit after the surgery: modifier 24 if it was for an unrelated problem; if it was routine post-op follow-up, record it as 99024 (Expected denials and 99024).
  • A visit the day before or the day of a major surgery: modifier 57 if it was when the decision to operate was made; on the day of surgery, modifier 25 if it was for a significant, separate problem.
  • A procedure inside the period: 58 if it was staged or planned, 78 for a return to the operating room for a complication, or 79 if it was unrelated to the surgery.

Add the modifier with Edit Codes only if the note supports it; otherwise the claim goes out as it is.

The same Claim Submission page has Send the referring provider on claims, off by default. Administrators or staff with billing-settings permission can turn it on to include the visit’s referring provider name and NPI in CMS-1500 box 17.

Next to it, List the provider as the ordering provider for their own tests (also off by default) covers a test the provider ordered and performed themselves, for example an in-office ultrasound: a radiology or lab line is sent with the rendering clinician as the ordering provider. It is used only when the claim has no referring provider to send, and the claim’s readiness check warns when that clinician’s name or NPI is missing. With it on, Billing Hero can also refile a test denied for a missing ordering provider.

The same page holds the Appeal kit card and Post-op visits (99024).

Hero supplies the reference tables. If the panel says the tables are missing or out of date, ask Hero support to load the current quarter. The practice cannot upload these tables from this screen.
5.19Third insurance

Bill tertiary insurance after the secondary payer responds

Tertiary claims start off. An administrator or staff member with billing-settings permission opens Billing → Claim Submission → Secondary and tertiary claims and turns on Bill a third insurance (tertiary) after the secondary pays.

  1. Check the patient’s coverage order. Record the third active policy as coverage order 3 on Patient Information → Insurance. Review the first and second policies too.
  2. Choose the sending policy. Before sending secondary and tertiary claims offers Hero default (with the current default shown), Send automatically, or Hold for review. Held claims wait in Claims Pipeline → Held.
  3. Review or prepare the claim. After the secondary payer has processed the visit, Hero can prepare a tertiary claim carrying both earlier payers’ payments. Staff with claims-management access can also use Prepare tertiary claim on the secondary claim when available. Read any reason it cannot be prepared before changing coverage.

Hero skips automatic tertiary preparation when the secondary payer says it already forwarded the claim, and does not send tertiary claims to traditional Medicare. Manual preparation after a reported forwarding opens Prepare a tertiary claim anyway?; verify that another submission is needed before choosing Prepare anyway. An eligible pending tertiary claim holds the patient’s share while the next payer answers, just as a pending secondary does. With tertiary billing off, the share left after secondary processing is billed to the patient.

5.20Denial self-pay prices

Apply an undoable self-pay price after an eligible denial

Billing → Configuration → Denial Self-Pay lets a practice set a lower patient price for selected codes after the final insurer denies them as the patient’s responsibility. Administrators and staff with billing-settings permission manage the rules; applying or undoing an adjustment requires billing-adjustment permission.

  1. Add a price rule. Use Add rule, enter the CPT / HCPCS code, optional modifier, and Self-pay price per unit, then Save rule.
  2. Turn it on, then choose manual or automatic. Use self-pay prices for denied claims starts off. Turning it on lets authorized staff apply a rule to an eligible denied line from the claim. Underneath, Apply automatically when an eligible claim is denied also applies the rules to new remittances as they post; it starts off when you first turn the feature on, so a practice can work denials by hand only. Automatic application never reprocesses old denials. A practice that used automatic application before this option existed keeps it on.
  3. Review an existing denial. On an eligible claim line, choose Apply self-pay price, review the patient price and adjustment against the unpaid balance, then Apply price. Recent applications shows the outcome. If the patient already paid, review the payment separately; the price adjustment does not issue a refund.
  4. Undo when needed. Choose Undo on the application or claim line, enter a reason, and confirm with Undo adjustment. This restores the balance affected by the adjustment; it does not move cash.
Only eligible final denials qualify. Practice-liability denials, ordinary copay/coinsurance/deductible amounts, Medicare, Medicaid, and QMB patients are excluded. Hero waits while another insurer still needs to process the visit. Review any blocked or partial application rather than assuming the full reduction happened.
5.21Stedi setup & transition

Connect Stedi, track enrollments, and download received ERAs

Connect the practice’s own Stedi account

An administrator opens Admin → External Providers → Stedi. When Hero has enabled account self-setup, the Your Stedi account card offers Set up Stedi account. Create an account or sign in on Stedi’s website, review HeroEMR’s requested access, and approve. You return to Hero, where the card shows Connected. If the card is absent, ask Hero support to enable self-setup.

Connecting this account does not change the practice’s current claims or eligibility route and does not itself approve payer enrollments. Reconnect renews the connection. Disconnect removes the connection from Hero; to remove access completely, also uninstall HeroEMR from Apps in the Stedi account.

Work the enrollment tracker

In Practice Setup, use Open enrollment tracker on the Stedi tasks step. Administrators and staff with billing-settings permission can open the workspace. The Enrollments tab groups work into Practice action, Needs review, Waiting on Stedi / payer, and Live. Select an enrollment to read the payer, provider, transaction, and What to do next, then complete the requested information or task.

Search, the status groups, and their counts cover every enrollment in the practice, not just the page you are on; results are paged. Counts use each enrollment’s latest saved status, and the page you are viewing refreshes from Stedi. Show all enrollments clears the search and filters — the enrollment you had open may then be on another page. If a status is Not verified, Hero could not verify it with Stedi and pauses task submission for that enrollment. Refresh and resolve the reported issue. Submitting a task is not payer approval.

Download transition remittances

Open Received ERAs in the same workspace. Filter by Received from and Received through, or choose All dates. Each report shows its payer/payment details and matched, unmatched, and posted claim counts. Download PDF additionally requires claims-management permission. Reports can remain available even when the original claims were filed outside Hero.

Downloading does not post a payment. Read the workspace’s automatic-intake and posting notices, and check the posted claim count before reconciling in another system. If automatic intake is unavailable, Hero turns this on for your practice — ask support. The normal Payments workflow remains the place to resolve matched remittances that need review.

Choose the default payer for scanned Medicare cards

In Admin → External Providers → Stedi, set Default Medicare payer to the practice’s Medicare Part B payer. Scanned Original Medicare cards then start with that payer in staff and patient-portal insurance forms, and staff payer searches list it first. Review the match before saving; staff can change it. Medicare Advantage cards still need their own plan’s payer. The Medicare claims card beside it, and what to do with claims addressed to another state’s contractor, are in Medicare claims.

Check the claims payer separately from eligibility

A policy’s eligibility payer can differ from the payer that receives its professional claims. Hero explains the destination when it applies a supported payer mapping. For supported out-of-area commercial Blue plans receiving care in Colorado, claims route to the local Blue plan while eligibility stays with the member’s home plan. This is not a blanket rule for every Blue plan or every state.

A delegated behavioral-health network can also require a different claims payer. Hero turns that routing on for an eligible practice after reviewing its network arrangement — ask support. Keep the patient’s actual coverage on file and review the claim’s destination instead of changing the insurance card just to redirect a claim.

Payers that send no electronic remittance, and enrollments Stedi started on its own: Catch payers with no electronic remittance.

5.22Prior Auths queue

Follow up on authorizations across the practice

Billing → Operations → Prior Auths brings the practice’s authorizations into one worklist. Administrators, practice owners, and staff with prior-authorization access can work it; billing-dashboard access also allows viewing. It complements the patient’s Prior Auth tab.

  1. Choose the work to do. Use Needed, Pending, Follow-up due, Denied, Expiring, Expired, Partial approval, or All actionable. Search by patient, MRN, or authorization number, and filter by payer or provider. An authorization can belong to several buckets, so their counts need not add up to the overall count.
  2. Review the request and decision. Rows show the effective dates, requested/approved/used units, and next follow-up. A Partial approval badge identifies fewer units approved than requested — the same wording as the patient’s Prior Auth tab.
  3. Update the record. Edit auth opens the patient’s authorization record when your permissions allow it. Set follow-up opens Set follow-up date; choose a date and Save follow-up, or leave it blank to clear the date.
  4. Send it to the Billing Queue when a person needs to work it. Send to Billing Queue creates a Billing Queue item for an authorization that is not already there. An authorization that already has an open item shows an In Billing Queue · {who has it} chip in its status cell instead; select the chip to open that item and follow up there rather than sending it again.

Authorizations marked Entered in error are left out of every bucket, count and search, and an authorization that a newer one replaced drops out of Expiring and Expired without an alert (see Prior auth letters & corrections).

At the top of the queue, Read authorization letters with AI (off by default) adds Scan authorization letter to each patient’s Prior Auth tab and Add authorization from this fax to filed prior-authorization faxes: Hero reads the payer’s letter and fills in the authorization for your staff to check before saving. Administrators and staff with the billing-settings permission can turn it on.

In Claims Pipeline → Action Center, denial rows now include the denial code and explanation, plus Appeal by or Timely filing dates when known. Use that context to prioritize the next action.

5.23Billing Queue (was Human Review)

Human Review is now the Billing Queue

Billing → Operations → Human Review (formerly Hero Billing), the practice’s queue of billing problems that need a person, is now the Billing Queue: a page of its own with a Billing Queue tab in the top menu, right after Billing (Alt + 8). In Billing, Operations → Billing Queue opens it, and old links to Human Review or Hero Billing open the same item there. It is documented in Part XXXI, Billing Queue:

5.24Billing Hero

Billing Hero: let Hero work insurance problems for you

Billing → Operations → Billing Hero is Hero’s AI billing assistant. It looks into failed insurance checks, claims rejected or held before sending, and some denials; it fixes what it can, or proposes the fix for a person to approve, and hands the rest to the Billing Queue with what it found. It is off until your practice turns it on.

The tab

  • A status chip by the title: Off, On · a person approves each change, or On · automatic.
  • Waiting for approval: the changes Billing Hero proposes.
  • History: every problem it looked at, and what came of it.
  • Hand-offs to a person: what it sent to the Billing Queue, and where each one is now, In the Billing Queue or Closed in the Billing Queue (press Show).
  • The gear at the top right, Billing Hero settings, opens the settings.

Who can do what

  • Seeing the tab: administrators, the practice owner, and staff with the billing-dashboard, claims-management or billing-settings permission. Others read “Billing Hero is not available for your role.”
  • Approving or rejecting a change: the claims-management permission. Moving a claim to another insurance company also needs the reroute permission.
  • Changing the settings: the billing-settings permission. Every change is recorded.

Turn it on

  1. Open the settings. Click the gear, or Set up Billing Hero on the tab while it is off.
  2. Choose How Billing Hero works. Off (Billing Hero does nothing.), A person approves each change (recommended to start) (“Billing Hero looks into each problem and proposes a fix. Nothing changes until a person approves it.”), or Automatic (“Actions you set to Automatic happen on their own. Actions set to Propose still wait for a person.”).
  3. Choose What sends a problem to Billing Hero. Each switch is off when you first turn Billing Hero on (table below).
  4. Choose What Billing Hero may do. Each action is Off, Propose or Automatic (look-ups and Hand to a person are simply Off or On). While a person approves each change, every change waits for approval, even actions set to Automatic; handing a problem to the Billing Queue never waits.
  5. Click Save Billing Hero settings. Closing the window with unsaved changes asks first.
What sends a problemWhat it covers
A patient's eligibility check failedCoverage inactive, member not found, or a name or birth date the payer didn’t match. These reach Billing Hero only when 7. Send failures to Billing Hero is also on in Billing → Configuration → Eligibility.
An eligibility check failed because of a setup problemProvider enrollment, payer setup or Hero settings, and policies whose payer can’t be checked at all.
A claim was rejected before the payer processed itThe payer’s or clearinghouse’s rejection message is passed to Billing Hero word for word (any member ID, group number, date or other value Stedi echoes in its own check messages is masked).
A claim was held before sendingA payer enrollment problem (including Medicare claims addressed to the wrong regional contractor), a patient address that is missing or incomplete, or a policy whose member ID and group number are the same.
Denied claim (coverage or patient identity)A remittance that denied a claim because the payer couldn’t identify the patient or the coverage wasn’t active (for example CO-31, CO-109, CO-22, or CO-16 with MA27), and the expected and duplicate denials described below.
Starts asActions
OnLook-ups that change nothing: Look up the case, Search the payer list, Ask the payer about corrected details (these checks are listed on the patient’s Insurance tab), Look for the patient's address; and Hand to a person.
ProposeCheck eligibility again; Correct the insurance (only while no claim on the policy reached the payer); Send a claim again (one that never reached the payer); Release its own holds (never anyone else’s); Contact the patient; Message the provider or the Billing Queue; Fill in the patient's address (only when it is missing or incomplete, never replacing one); Rebuild a held claim.
OffFile a corrected claim for a denied claim; Close a denial the payer was expected to make; Read the patient's insurance cards and authorization letters; List the billing documents in the patient's Media tab (clinical documents and photos are never listed); Look at scans in the patient's Media tab (each look is recorded in the access log); Read appeal kits; Look up insurance company appeal steps; Search the billing library; Read billing library documents.

The settings window also says where hand-offs go: “When Billing Hero needs a person, it sends the problem to the Billing Queue ({name}).” with Open the Billing Queue. Who reviews is set in the Billing Queue settings.

Approve or reject a proposed change

Waiting for approval (“Approving re-checks them against today’s records first.”) has Waiting and Decided views. Each card names the change, the patient, the claim and payer, when it was proposed, Billing Hero’s reasoning and the exact values it would set; an insurance correction says The payer confirmed these details or The payer has not confirmed these details. Choose Approve, Edit then approve (change the details; the patient, policy and claim stay the same), or Reject with a Why?. The same cards appear on the item in the Billing Queue, where Reject asks you to pick a reason (Approve or reject changes); the first decision wins. Approving a change whose result comes later, such as an insurance search or a call to the payer, keeps the item open until the result is in (What we’re waiting on). History lists each problem with what the payer said, the result (Fixed or proposed a fix, Handed to a person, Nothing to do…) and Show steps.

What Billing Hero does with common problems

ProblemWhat Billing Hero does
The payer turned a claim back because it couldn’t find the memberOnce the payer confirms the member details, it files a new claim to the same payer under them (with File a corrected claim for a denied claim on). If your practice instead replaced the policy with another insurance company, it proposes “File to {new payer}, the patient’s insurance now.” (always a proposal, whatever the settings): the card shows whether the new payer confirmed coverage for the visit, or Needs your confirmation, in which case Approve asks Where did you confirm the coverage? Approving it needs the reroute permission.
A denial about coverage or the patient’s identityIt checks eligibility. When the payer confirms coverage it files a new claim (with File a corrected claim for a denied claim on; to another insurance company only after a person authorizes the move); otherwise it asks the patient for a card or hands the problem to a person.
A claim held or turned back because the member ID and group number are the same, or because the member ID is invalid or too longIt checks the policy with the payer as it is, corrects the member ID and group number to the ones in the payer’s answer (with Correct the insurance), and sends the same claim again (with Send a claim again). It changes the policy only while no claim on it reached the payer. See Member ID and group number.
A test denied for a missing ordering providerWhen List the provider as the ordering provider for their own tests is on in Claim Submission, it files a new claim that lists the provider. On a split or partly paid claim it files only the denied test lines, and the original keeps its other lines.
A duplicate denialIt never refiles and changes nothing. It hands the problem to a person with the earlier claim’s next step (for Medicare, ask Medicare to reopen the earlier claim).
Medicare answers that only Part A is activePart A alone doesn’t cover your practice’s claims, so it never refiles or bills the patient on that answer; it hands the problem to a person, naming any other active plan on file.
A replaced Medicare numberWith card reading on, it reads the patient’s cards in the chart first. It changes the policy only while no claim on it reached Medicare; otherwise it hands the confirmed number to a person. Without a card it asks the patient for a photo of the current card. It never asks for a Social Security number.
A medical group that takes the claims while the health plan answers eligibilityIt finds the health plan from the card or the member ID, checks it, and proposes Check eligibility with that plan. It never changes the group’s claims payer, and asks the patient for a card only when none is on file.
An expected bundling or post-op denial, a quality code the payer never pays, or an after-hours code on a telehealth visitSee Expected denials and 99024 post-op visits.
Insurance policies whose insurer Hero can’t match to a payer (common after a chart import)You get one Billing inbox item per insurer name, Choose the payer for “{insurer name}” (N insurance policies), instead of a look at each policy. Open the item and press Choose payer to pick the payer once; Hero links it to every waiting policy with that name that has no payer yet (see Choose the payer for an insurer name below). For Medicare, TRICARE, CHAMPVA, VA, Carelon, Kaiser or self-pay names, choose the payer on each policy, because it can differ from patient to patient. The item updates its count each hour and closes by itself when no policy with that name is waiting.
An insurance check Hero can’t sendBilling Hero’s note says exactly why: for example the policy is held until a person confirms its payer, electronic eligibility checks are off for the practice, or the member ID is missing. These don’t change on their own, so Billing Hero doesn’t wait and try again; it hands the problem to a person, or leaves it to the one item that already covers it. Only a payer whose system didn’t answer is tried again later.
A payer that refuses your provider for insurance checksBilling Hero looks at the first patient. Every later patient refused the same way by the same payer waits on one practice item, Enroll {provider} with {payer} so Hero can check eligibility. See Eligibility error 41.
A policy you are working onWhen you edit a policy or run its insurance check yourself, Billing Hero waits 15 minutes after your last change before it looks at that policy, and keeps only one look per policy waiting.
A claim turned back for a missing or mismatched group numberIt first asks the payer with the patient’s member details and no group number. When the payer confirms coverage and returns one group number, it adds that number to the policy (with Correct the insurance) and sends the claim again (with Send a claim again). Each policy is checked with the payer on its own; a group number is never copied from a family member’s policy.
The payer acknowledged a claim and now has no record of itWhen the payer has answered twice, at least a week apart and 30 or more days after the claim was sent, that it has no record of the claim, Billing Hero files one card to send it again as a new claim. The card shows both answer dates and how many days are left in the payer’s filing window. It always waits for a person’s approval, whatever the settings.
A denial that says another insurance pays firstBilling Hero may run its check for other insurance right away, without asking the patient first. What it finds is a change for a person to approve; it never reorders a patient’s insurance or refiles on a search result alone.
99417 denied by Medicare, TRICARE or VA Community CareThese payers pay prolonged office time as G2212, never 99417. Billing Hero hands the claim to a person with the G2212 units the billed time points to, and says when a quality code denied beside it was expected. A person reads the note’s total time and sends the corrected claim. Don’t appeal it.
A line denied because its modifiers don’t fit the code (CO-4)Billing Hero names the line, its modifiers and what each remark means, and hands it to a person: correct the line from the note and send a new claim with only that line. A Medicare line whose fix is removing modifier 51 is still handled by Billing Hero itself.
A secondary claim denied as a duplicate, or with CO-22 (another payer pays first)Duplicate: when the primary’s payment report shows it already forwarded the claim, nothing is sent again, and the secondary’s answer comes on the forwarded claim. CO-22: the item gives the primary’s answer and the order of the patient’s insurance on the chart, so a person can sort out which pays first. Hero never reorders coverage. Routine secondary adjustments (OA-23) never make an item.
A clinician the payer says was not eligible on the visit date (CO-B7)One Billing inbox item per payer and clinician, Enroll {clinician} with {payer}: claims denied, not eligible on the date, lists the claims denied this way (the newest 60, with the total). Fix the enrollment, send the listed claims again with Correct & Refile, then resolve the item.

When Billing Hero takes a denial, the general denied-claim alerts for that claim close themselves and name the item that carries the denial now, so each denied claim has one item. An alert a person is already working stays open with a note.

Insurance cards, and steps Billing Hero skips

  • Every number on a card, by its label. Billing Hero keeps each number on an insurance card with the label printed beside it and uses it only where that label allows: a Medicaid ID only with that card’s plan or the state’s Medicaid program; an Rx ID only with the insurance company on the same card; on a military ID, the DoD Benefits Number as the TRICARE member ID and never the DoD ID; pharmacy numbers (Rx BIN, PCN, Rx group) never. When a number or a name spelling is missing from a card read earlier, Billing Hero reads that card again once before it hands the problem to a person. A scan that shows more than one card is read as its first card. It still changes a policy only after the payer confirms the exact details.
  • Steps that can’t work are skipped. Billing Hero doesn’t try a call to the payer where Hero’s payer calls aren’t available for your practice, or an electronic claim status check at a payer that answers none. When a person needs to call, the hand-off gives the payer’s number from the Payer Phone Book when Hero has one.
  • A note that ends “Billing Hero used all of its steps for this look, so it decided without more checks; a person finishes it from what it found.” Billing Hero reached the most steps it may take on one problem and decided from what it had found.

Billing Hero reads each denial code with its official meaning. Its own Billing Queue items close by themselves once the problem is gone and nothing they wait on is outstanding, for example when a held claim reached the payer, a rejected claim went out again and the payer acknowledged or accepted it (whoever fixed it), a later check confirmed active coverage, or the corrected claims were accepted: “Closed automatically: … Nothing else is left on this item.” Items a person is working stay open.

Choose the payer for an insurer name

When insurance is imported or registered with an insurer name that doesn’t match Hero’s payer list, those policies can’t be checked for eligibility and their claims can’t be sent. Hero groups them by insurer name and puts one item in your Billing inbox: Choose the payer for “{insurer name}” (N insurance policies). You choose the payer once, on the item:

  1. Open the item. Go to Inbox, then Billing, and open the item.
  2. Press Choose payer. Search for the payer and pick the listing that shows Claims. The Payer ID on the insurance card gives an exact match.
  3. Confirm. The button names the payer and what it links: Use {payer} for all N policies, or Use {payer} for X of these N policies when some of them can’t be linked this way.

Hero links that payer to every waiting policy with this insurer name that has no payer yet, releases claims that were held only because the payer was missing, and checks each policy’s eligibility with that payer. The results appear on each patient’s Insurance tab. The item closes by itself once no policy with the name is waiting. Hero links up to 25 policies at a time; if more are waiting, choose the payer again.

  • Hero never replaces a payer already on a policy. A policy that already names another payer (an Office Ally payer or a payer ID) is left for you to fix on the patient’s Insurance tab. When every waiting policy is like that, the item says so and has no Choose payer button.
  • You see what was left alone, and why. After you confirm, Hero says how many policies it linked and how many it left, for example a payer your practice bills through Hero only for some clinicians when the patient sees another clinician.
  • Names with no Choose payer button. For Medicare (including contractors such as Novitas, Noridian, Palmetto GBA, First Coast and National Government Services), TRICARE, CHAMPVA, VA, Carelon, Kaiser, self-pay and cash, the right payer differs from patient to patient. Choose it on each patient’s Insurance tab.
  • Who can do it. Anyone who can see the Billing inbox, edit patients’ insurance and search payers (for example Biller, Billing Manager or Office Manager), and practice administrators.
Check the payer before you confirm. If it is the wrong one, every one of these patients’ eligibility checks fails and is followed up like any failed check, including a message to the patient if your practice has that turned on.

When Billing Hero contacts the patient

Contact the patient starts at Propose, so a person approves (and can edit) each message first. Billing Hero asks only for something the patient can give, such as a clear photo of their insurance card, and never tells a patient their coverage was not found. The patient gets a secure portal message from the visit’s provider (Action needed: please send {items}) with how to reply or update their card, plus a text and an email pointing to it, and reminders after 1 and 3 days, sent only during the day in your practice’s time zone, until they reply or upload. A patient without a portal account gets one text or email; when your practice has a Billing Hero mailbox, it tells them where to email their photos or answer. Their opt-outs apply, and each patient has one open request at a time. While Hero waits for the reply, the Billing Queue item lists Patient’s reply about … under What we’re waiting on and stays open; when they reply, upload, or don’t answer, the item says so and comes back to a person. Set Contact the patient to Off to stop it.

The Billing Hero mailbox

A practice with Billing Hero on can have a Billing Hero mailbox: an email address Hero gives the practice. Patients who don’t use the patient portal can email it photos of their insurance card and their answers to Billing Hero’s questions. Your address is shown under Mailbox in Billing Hero settings. Hero sets it up; there is nothing to turn on. If the settings say No mailbox yet, Hero can set one up for you.

  • What patients see. When Billing Hero texts a patient without a portal account about their insurance, the text gives the mailbox address to email the photos to, and its emails can simply be answered. Portal requests don’t change.
  • What Billing Hero does with the mail. It works out which patient sent it (from the reply address in its own message, or the patient’s email address on file), puts the photos and PDFs on that patient’s chart (Media tab, Sent by email to the billing mailbox), and looks at the insurance problem again with what the patient sent. It changes a policy only after the insurance company confirms the new details, exactly as with a card uploaded in the portal. It never answers the email and never acts on anything else the patient asks for in it.
  • Mail that needs a person. When Billing Hero can’t tell who sent the mail, isn’t waiting on anything from that patient, or can’t read a file (for example some iPhone photos), the mail shows in the tab’s Mailbox section as Needs a person, with an item in the Billing inbox. Open it to read it and View the files. Then use Match to a patient (the files go to their chart, and Billing Hero looks again if it is waiting on them), Done (you handled it) or Set aside (it isn’t billing mail). Closing its Billing inbox item also marks it done.
  • Status words. Billing Hero is looking at it, Billing Hero used it (with what it did), Needs a person, Done and Set aside. Spam, automatic replies and mail over the daily limit are set aside on their own.
  • How long mail is kept. Mail matched to a patient stays with their billing record. The text and files of mail nobody matched, and of mail set aside, are removed after 30 days.
  • Which address you get. The address is always one Hero receives mail at: billing@ on your practice’s own Hero mail host when that host delivers mail to Hero, otherwise an address on Hero’s shared mail domain (for example yourpracticebilling@labs.soaper.ai). Both work the same way. To have an existing billing inbox watched, forward it to the Billing Hero address; forwarded mail shows up for a person.
No AI model or cost settings. Hero manages Billing Hero’s AI model, its limits and its costs; practices don’t see or set them.
5.24bMore Billing Hero settings

More Billing Hero settings: modifier-25 and G2211 warnings, grouped denials, asking the patient, payer calls and claim status

These settings sit in Billing Hero settings (the gear on the Billing Hero tab), below the parts described in Billing Hero. Changing them needs billing-settings permission; press Save Billing Hero settings when you are done. Each one shows only when it is offered for your practice.

Denials (each off to start)

SwitchWhat it does
Warn before sending an office visit without modifier 25 to an insurer that bundled oneShows a warning on a claim whose office visit has same-day tests or procedures but no modifier 25, when that insurer denied the visit as part of the same-day services on every recent claim like this (its last 5 or fewer). “Hero never adds the modifier for you.” Add it with Edit Codes only if the note supports a significant, separately identifiable visit.
Warn before sending G2211 to a payer that is not paying itWarns on a claim with G2211 when that payer’s last answers on G2211 (at least 2 of your last 5) were all “included in the visit” with nothing paid. Hero never takes the line off for you.
Group similar denials from the same payer into one review itemWhen several claims come back denied by the same payer for the same reason, the Billing Queue shows them as one item with every claim, its amount and what Billing Hero proposes, and you can approve them all at once.

When insurance can’t be confirmed

Billing Hero first tries the fixes it can confirm from the chart, then asks the patient. Ask the patient first (on to start) sends the patient a portal message, with a text and an email, without waiting for approval. Escalate if the patient hasn’t answered in (3 days to start) and Escalate right away if their next appointment is within (3 days; 0 never escalates because of an appointment) decide when it moves on, either searching for the patient’s insurance when that lookup is on or handing the problem to the Billing Queue. Ask patients for a missing home address or the policyholder’s name and birth date (off to start) lets it ask for those too when a claim is held for them.

Other switches (each off to start)

  • A claim has had no answer from the payer for weeks (under What sends a problem to Billing Hero): with Ask the payer where a claim stands on, Billing Hero asks the payer about each such claim at most once a week and acts on the answer.
  • Check claim status through Stedi for claims sent through Office Ally: asks the payer through Stedi when an Office Ally claim has had no answer. Each check is billed at Stedi’s claim status price (up to $0.30), at most one per claim per week.
  • Treat a failed check on a Medicare supplement as fine when Original Medicare is active: closes a Medigap policy’s failed check instead of handing it to your team, when the patient’s Original Medicare is confirmed for the visit.
  • Wait for Hero's setup: when a check or claim fails because Hero is still finishing your enrollment or credentialing with a payer, Billing Hero waits for that instead of giving your team a to-do.

Newer actions under What Billing Hero may do (each Off to start)

Ask the payer where a claim stands; Replace a policy the insurance company already has records on; Retire a policy the insurance company says is no longer in force; Look up the provider's NPI and Medicare enrollment; Correct the patient's name to the spelling the payer confirmed (a person always approves it); and Call the payer (Hero AI call), where Hero’s AI phone agent calls the right department from the Payer Phone Book to ask one question. Payer calls per day caps those calls (1 to 50); calls beyond it wait for a person.

5.25Appeals

Appeal a denied claim with the appeal kit

The appeal kit puts everything an appeal needs in one place: why the insurance company didn’t pay, the best next step, the insurance company’s own appeal steps with their sources, a suggested letter you can edit, and one PDF packet with the evidence. When you are ready, you send it from Hero by fax, by mail, or through the insurance company’s portal, or you record what you sent yourself. Hero sends nothing until someone on your team confirms the send.

Where it is

  • Prepare appeal on a denied or underpaid claim in Claims Pipeline (the claim detail, next to Log Appeal).
  • Billing → Operations → Appeals: every appeal in one list, soonest deadline first.
  • Rejected and pended claims have no appeal: a rejection is fixed with Correct & Refile.

Turning it on or off

  • The kit is on for every practice. The Appeal kit card in Billing → Configuration → Claim Submission turns it off; existing appeals are kept.
  • Changing it takes the billing-settings permission; others read “Someone who manages billing settings can change this.”
  • Working appeals takes the claims-management permission. Putting a visit note in a packet also needs permission to view visit notes.

Prepare the appeal

The kit opens on the claim with its patient, claim number, the insurance company’s claim number, the visit and what wasn’t paid, plus an Appeal by chip (Appeal by {date} · N days left, amber at 30 days or fewer and red at 7 or fewer) and a reference such as Ref HA-7K3M9Q that insurance companies quote back. Everything you type saves as you go. The steps:

  1. What happened — why the insurance company didn’t pay, in plain words: each denial code with its official wording, the billed, paid and not-paid amounts, and the services.
  2. Best next step — what usually gets this kind of denial paid, such as Send a corrected claim, Ask for a reconsideration, File a written appeal, Send the requested records, Update the coverage on file or Fix provider enrollment. Other options and Use this instead pick another path; Open Correct & Refile takes you to a corrected claim instead.
  3. Where to send it — the insurance company’s own appeal steps, each with its source: Open portal, the provider phone, the Time limit, the appeal form, and the ways to send (online, mail, fax). If it’s the wrong plan, use Not the right plan? and Find it in the directory. When Hero can’t confirm a step on the insurance company’s own website it says so: check the back of the patient’s card or the EOB before you send.
  4. Your argument — a suggested letter built from the denial, with numbered sources. Edit any paragraph; parts that still need your words are highlighted in yellow in [brackets]. Copy all and Copy for portal copy it; Reset to suggested starts over.
  5. Evidence packet — choose what goes in and in what order: the appeal letter (always first, on your letterhead with a signature line for the provider), a claim summary, the insurance payment notice (EOB), signed visit notes, insurance card photos, and files you add (drop an EOB or letter as PDF, JPEG or PNG up to 25 MB, and say What is it?). Items Hero can’t include are listed under Not available with the reason. Build & preview makes the PDF; look at every page, then Download, Print, or Send this packet.
  6. Send — a column on wide screens, a step on narrow ones (below).
  7. Response & outcome — what the insurance company said back, and what happens next (below).
The packet is what gets sent. Visit notes go in only when signed; drafts, psychotherapy notes, and notes hidden from the portal or restricted are never included. If you change the letter or the evidence after building, Hero asks you to rebuild the packet before sending.

Send it

ChoiceWhat happens
FaxPick the insurance company’s fax number from its appeal steps, or Type a different number. A cover sheet names the appeal, the claim and the reference. Send fax asks Send this fax? first. It goes out on your practice’s fax line, so fax must be set up in Admin → External Providers.
MailOnly when Hero mails appeals for you is on (below). Check the address, choose the service (First-class, Certified, Certified with return receipt), and confirm with Mail it; the price is shown before you confirm. Hero warns when mail would arrive after the appeal-by date.
PortalHero copies the letter text, downloads the packet to attach, and opens the portal. You submit it on the portal yourself, then answer Did you submit it on {portal}? with the reference number, the date and a follow-up date, and press Log it.
I sent it myselfLog what you sent: how, the date, the appeal level, a follow-up date (“Hero reminds you on this date.”), a reference and notes, then Log submission.

Tracking shows each send’s progress (a fax from sending to delivered; a letter from the printer to delivered). A fax Hero couldn’t confirm asks you to check your fax service’s sent list and choose It went through or It didn’t go through. A delivered fax, a mailed letter or a logged submission marks the appeal Submitted and the claim appealed. Hero won’t log a submission after the appeal window has closed: contact the insurance company about a late appeal first.

Response & outcome

  • Answers find the appeal. An incoming fax that quotes the appeal reference, or a payment report for the claim, appears under Needs your review as a possible answer: Confirm it or choose Not this appeal.
  • Record a response yourself: attach the letter (Read it for me fills in the fields from it, and says how clearly it could read it; check them), then What did they decide?, how and when it arrived, the amount approved, a respond-by date, their reference and notes, and Record response.
  • Outcomes are Won, Partly won or Lost. Recording one adds a note to the claim and never changes money: payments still post only from the ERA or EOB. After a loss, Start level 2 appeal starts the next level; Hero tracks up to level 3, and after that the decision letter says how to ask for an external review.
  • Alerts. The Billing inbox reminds you when a follow-up is due, and tells you when an appeal fax didn’t go through or a letter came back.

The Appeals list

Billing → Operations → Appeals (shown while the kit is on, to people who manage claims) lists every appeal under Open, Submitted and Closed, with Needs review and Follow-up due chips and a search by patient, claim number or reference. Each row shows the insurance company, the claim, the appeal-by date, the status with the latest send, and the last update. Statuses are Draft, Ready, Submitted, Insurance asked for more, Won, Partly won, Lost and Closed. New appeal for a claim billed outside Hero starts an appeal from an EOB for a claim Hero didn’t file: enter the patient, the claim, the denial codes and the services, then Create appeal. It never changes Hero’s claims.

Settings

In Billing → Configuration → Claim Submission, the Appeal kit card holds the main switch and Hero mails appeals for you, which starts off: “When it’s on, the appeal kit’s Send panel can print and mail a packet for you. Each letter is confirmed, with its price, before it goes out.” Postage and printing go on your Hero invoice. Usual service sets the default mail service; you can pick another for each letter. Turning mail off later still delivers letters already on their way.

Log Appeal still works. Log Appeal only records an appeal you filed some other way (“Hero records the appeal here; it doesn’t send it.”) with a required reason and the payer’s reference. Use the kit when you want Hero to prepare and send it.
5.26Expected denials & 99024

Expected denials and 99024 post-op visits

Some denials are expected and need no appeal: a 99024 post-op visit inside a surgery’s global period, or a line the payer pays only as part of another service it already paid. Two settings keep them from piling up in the Denied / underpaid lane: one stops the claim being sent at all, the other lets Billing Hero close the denial when it comes back.

Record 99024 post-op visits without a claim

In Billing → Configuration → Claim Submission, the Post-op visits (99024) card explains: “99024 records a follow-up visit during a surgery’s global period. The surgery’s payment already covers it, so insurance companies deny a claim for it.”

  1. Choose When a visit's only service is 99024. Send a claim (default) or Record the visit only, no claim.
  2. Choose For. Original Medicare only (the default) or Every insurance.

The card saves as you change it; it needs the billing-settings permission. With Record the visit only, signing a visit whose only service is 99024 makes no claim, and Hero removes its 99024 charge so no one is billed for it; the clinician sees “This practice records 99024 post-op visits without sending a claim; the surgery’s global payment covers them. Ask your billing team if this visit needs a claim.” A visit with any other billable service, money already posted on its charges, or a claim that may have reached a payer is billed as before.

Some states require 99024 on Medicare claims. When your practice has locations in Florida, Kentucky, Louisiana, Nevada, New Jersey, North Dakota, Ohio, Oregon or Rhode Island, the card warns that Medicare requires practices with 10 or more clinicians there to report 99024 for visits after certain surgeries. If that applies to you, keep sending 99024 claims to Original Medicare.

Let Billing Hero close expected denials

In Billing Hero settings, set Close a denial the payer was expected to make to Propose or Automatic (it starts Off), and turn on Denied claim (coverage or patient identity) under What sends a problem to Billing Hero. Billing Hero then closes a denial instead of sending it to the Billing Queue when the payer denied a line as included in another service it paid (CO-97, CO-234 or CO-236, or Medicare’s CO-B15 on a 99024) and that was expected:

  • a 99024 post-operative visit inside a surgery’s global period;
  • a code-pair edit that never pays the line separately;
  • a line billed for the same problem as a paid line.

Closing resolves the denial on the claim with a note saying why it was expected. A CO-97 denial needs no write-off; a CO-234, CO-236 or 99024 CO-B15 amount is written off. The claim is marked reviewed when the payer owes nothing else on it. Billing Hero never files a new claim, never adds a modifier, and never bills the patient: if closing would change what the patient owes, nothing is changed. A write-off above $250, an E/M line, a line with a patient share or a payment, a claim with another open denial, or any case that isn’t clear goes to a person in the Billing Queue instead.

With the same setting, Billing Hero also closes two more expected denials, and does it without a look by its AI model:

  • A quality code the payer never pays. A reporting-only code (a CPT II code such as 2010F, or a reporting-only G-code) billed above $1.00 and denied CO-246, or CO-96 with a remark that the code is not payable (N448, N365 or N620; VA payers answer this way). A CO-96 on a billable code is never closed.
  • An after-hours code on a telehealth visit. An after-hours code (99050 to 99060, for example 99051 with modifier 95) denied CO-96 with N776, or CO-231, when the payer paid the visit itself on the same claim. If the visit was denied too, a person looks at it first.

On Propose the close waits for your approval; on Automatic the held amount is written off under the same $250 limit. Nothing is refiled and the patient is never billed.

5.27When an insurance check fails

Decide what happens when an insurance check fails

Billing → Configuration → Eligibility decides what Hero does when an insurance check says the patient’s coverage can’t be confirmed: stop new bookings, cancel upcoming visits, tell the patient or your team, ask the clinician at signing, hold the claim, or hand the problem to Billing Hero. “Everything is off until you turn it on.” The top of the card counts N open insurance problems · N claims on hold.

Staff with the billing-settings permission, administrators and the practice owner can change it. Pure Cash and DPC practices find the tab with Show all tools. Press Save changes (or Discard) when you are done; leaving with unsaved changes asks first.

Which failed checks count

Tick the failures that should trigger your choices: Coverage not active, Member not found, and Name or date of birth does not match (all three to start). Only problems with the patient’s own coverage count. A setup problem on your side, a temporary error, or an insurer that won’t answer for a date that far ahead never blocks a booking, holds a claim, or alerts anyone.

Choice (each off to start)What it does
1. Don't allow bookingNew visits can’t be booked while the check is failing. Staff with permission can still book with a reason. Patients booking online read “We couldn’t confirm your insurance for this visit. Please update your insurance information or call the office to book.”
2. Cancel upcoming visitsOnce a day Hero cancels upcoming visits for these patients, with no cancellation fee, and the patient is told why. Set Within (2 days to start), Only if the check is newer than (3 days; an older check is run again first and Hero decides the next day), and Run at (7:00 AM practice time). The switch unlocks only after you press Preview today's cancellations, which lists the visits that would be cancelled today. Checked-in or started visits, visits booked with an override, and self-pay visits are never cancelled. The visit’s provider gets a to-do for each cancellation.
3. Tell the patientA portal message asks the patient to update their insurance or call the office, once per problem. Also text or email them (based on their preferences) is ticked when you turn it on. Patients without a portal account, or a practice with portal messaging off, get nothing.
4. Tell the provider or a teamA to-do, once per problem, for The visit's provider (ticked to start) and, if you choose one, A message pool.
5. Require a choice at signingThe clinician picks: hold the claim, or send it anyway with a reason. Notes are never blocked.
6. Hold claims at submissionClaims for these visits wait on hold instead of going to the payer, until the insurance checks out or someone releases them.
7. Send failures to Billing HeroEach failed check also goes to Billing Hero, which follows its own settings. If Billing Hero is off, the card says so.

At booking, signing and sending

  • Booking. Insurance check failed shows what the insurer said, for example Member not found, with “Fix the insurance and re-check, or book anyway with a reason.” With permission, type the Reason for booking anyway (Reason for saving anyway when moving or editing a visit) and press Book anyway; the reason is saved with the visit. Without it the dialog reads “Ask a biller or the office manager to book this visit.” Treatment series rows show insurance check failed instead of booking.
  • Signing. Insurance check failed says “Your note is signed either way. This only decides what happens to the claim.” Choose Sign and hold the claim (the claim is held even when choice 6 is off), or, with permission, Sign and send anyway with a Reason to send anyway. It asks only at the first signing of a visit that makes a claim; addenda are never asked.
  • Held claims. The claim waits in Claims Pipeline → Held with the reason Coverage verification. Its Release dialog shows Held because the insurance check failed, what the insurer said, Re-check eligibility (“If the insurance now checks out, the hold comes off on its own.”) and, with permission, Reason to release anyway and Release anyway. The hold never replaces another hold.

Open insurance problems

The tab lists “Patients whose last insurance check failed. Fixing the insurance and checking again closes the problem on its own.” with the patient, insurance, date of service, What the payer said and the claims on hold. Re-check runs the check again (claims-management permission). Mark resolved closes the problem and releases the claims it was holding, with an optional note; use it when the insurance is fixed or no longer matters. It needs the permission to go past a failed check (below). A problem also closes, and its holds come off, when a new check comes back active or the member ID, name, date of birth or payer on the policy changes.

Who can go past a failed check. Booking anyway, sending anyway and releasing a held claim need Book a visit or send a claim even though the insurance check failed (reason required). The Front Desk, Biller, Billing Manager and Office Manager role profiles and the practice owner have it; Medical Assistant and Nurse don’t. Physicians and administrators can book and sign past it. Patients can’t.
5.27bEligibility error 41

What “Eligibility check failed: 41” means, and other provider refusals

Eligibility check failed: 41 (also shown as AAA41 — Authorization/Access Restrictions) means the payer refused to answer the provider or group that asked. It is about your practice’s setup with that payer, never the patient: the check says nothing about whether the patient’s coverage is active. Don’t edit or retire the patient’s policy, and don’t ask the patient for a new card because of it.

Usual causes

  • Original Medicare. The provider’s NPI has no current Medicare eligibility (HETS) enrollment linking it to the clearinghouse that sent the check. The provider or group completes that enrollment through its Medicare contractor’s portal. It has nothing to do with which state the provider is enrolled in.
  • Medicaid. The NPI that asked isn’t enrolled with that state’s Medicaid program (or is enrolled only as a group, or the enrollment is still pending).
  • Commercial plans and Medicare Advantage. The plan answers only its credentialed or contracted providers, or the provider isn’t registered for electronic eligibility with the plan.
  1. Read the failure. On the patient’s Insurance tab, Latest eligibility failure shows the reason in plain words and the recommended action (Insurance & eligibility).
  2. Check which NPI asked. Many plans know only the individual provider, or only the group. Make sure the check went out under an NPI the payer has on file, and that the provider’s enrollment or credentialing with the plan is complete and effective for the visit date.
  3. Fix the enrollment, then run the check again. A new check helps only after the setup changes. Until then, verify coverage another way (the payer’s portal or phone line) and record it.
CodeWhat the payer is saying
41It won’t answer this provider or group (not set up or allowed to check this payer’s members).
42Its system can’t answer right now. Temporary: check again later. Not a setup problem.
43The provider ID sent isn’t on file with the payer (often the group’s NPI was sent).
44It didn’t accept the provider or group name sent with the NPI.
50This provider isn’t allowed to check eligibility with this payer, usually because it isn’t enrolled.
51The payer has no record of the provider ID (provider not on file).
52The provider wasn’t enrolled with the plan on the date checked.
79The payer or receiver named in the check is wrong for this payer: a setup problem between the clearinghouse and the payer.
These go to the setup list, not the patient list. Hero counts them as An eligibility check failed because of a setup problem, so Billing Hero and the Billing Queue never contact the patient about them. What Hero does when a check fails is set in When an insurance check fails.
5.27cPayer Phone Book

Find an insurance company’s phone number: the Payer Phone Book

The Payer Phone Book lists the phone numbers for each insurance company’s departments, such as provider services, eligibility and benefits, claims, prior authorization and appeals: “How to reach each insurance company’s departments. Benefit checks and Billing Hero’s payer calls use these numbers first.” Hours are shown in your practice’s time, and lines for your state come first. It is always on.

  1. Open it. Go to Billing and choose Payer Phone Book in the Operations group, after Prior Auths. Administrators, physicians and staff who can see patient insurance or work in Billing can open it; staff who can only collect payments can’t.
  2. Find the payer. Type in Search by payer name or payer ID. Each number shows its Hours (with Open now or Closed now), what it is For, where it Applies to (for example only one state or only Medicare Advantage), any Phone menu tips, and its Source with the date it was last confirmed. Press Copy or Call beside the number.
  3. From a patient’s chart. On the patient’s Insurance tab, press How to reach {payer} on the policy to see the numbers that fit that policy. When there are none: “Hero’s payer phone book has no numbers for {payer} yet. Use the phone number on the back of the card.”

Add your own number, or report a wrong one

Administrators, the practice owner and staff with claims-management or billing-settings permission can change what your practice sees:

  • Add a number. Press Add a number (on the page, on a payer, or in the How to reach panel). Fill in the Payer, What is this number for?, the Phone number and, if needed, the Extension, a Name for this number (for example your provider rep) and Phone menu tips. Press Add number. It is marked Added by your practice, only your practice sees it, and Hero offers your practice’s numbers first.
  • Report a wrong number. Press This number is wrong, optionally say what happened, and press Mark as wrong: “Hero won’t offer it to your practice again, and Hero’s team will check it.”
  • Remove your own number. A number your practice added has Remove. Hero’s own numbers can’t be removed, only reported.
5.27d“Verify by phone”

Eligibility says “Verify by phone”: payers that take claims but no electronic eligibility check

Some insurance companies accept electronic claims but don’t answer electronic eligibility checks. For a policy with one of these payers, Hero doesn’t run a check and doesn’t treat it as failed. Instead it says “This insurer doesn’t offer electronic eligibility checks. Verify coverage by phone.” This is not an error and nothing needs fixing in Hero.

  • Where you see it. Checking eligibility on the policy in the patient’s Insurance tab, or with Check eligibility on Billing’s Pre-visit worklist, answers at once with that sentence. The Pre-visit list shows a neutral Verify by phone status, and calendar prep and visit readiness say the same.
  • What to do. Call the payer to confirm coverage before the visit. Press How to reach {payer} on the policy for the right number (Payer Phone Book).
  • Claims still go out. No claim rule needs an eligibility check, so claims to these payers are sent as usual. You can pick such a payer when you edit a policy, and doing so releases a policy that was waiting for its payer to be confirmed.
  • Failure rules don’t fire. Because no check fails, the choices in When an insurance check fails (blocking bookings, cancelling visits, holding claims) don’t apply to these policies.
5.28Medicare claims

Send Original Medicare claims to the right contractor

Medicare bills by where you saw the patient, not where the patient lives. A patient’s Original Medicare card names no region, so a policy often points at the Part B contractor of the patient’s home state. Hero helps you send each claim to the contractor your practice bills.

Your practice’s Medicare payer

In Admin → External Providers → Stedi, set Default Medicare payer to your practice’s Medicare Part B payer. Then:

  • scanned Original Medicare cards start with that payer, in staff and patient-portal insurance forms;
  • payer searches for Original Medicare list it first, marked Your practice's Medicare payer;
  • picking a different Original Medicare payer warns “Your practice bills Original Medicare through {payer}…” with Use {payer} instead (see Original Medicare payers and Medicare IDs).

Medicare Advantage, supplement and railroad plans keep their own payer.

Fix claims addressed to another state’s contractor

An Original Medicare claim addressed to a contractor your practice isn’t enrolled with is held instead of sent. When Hero can tell which contractor the claim belongs with, the hold note says so, for example “Not sent: this claim is addressed to {contractor}, but Medicare bills by where you saw the patient, and you saw this patient in {state}, where claims go to {payer}. Use the button below to switch this patient’s Medicare and send the claim.”

  1. Find the claim in Claims Pipeline → Held. The held row shows Switch Medicare payer (claims-management permission).
  2. Check the suggestion. Switch Medicare payer says which contractor the patient’s Medicare is set to and suggests one, with the reason: “Your Medicare claims go to {payer}.”, “Your practice’s Medicare payer is {payer}.”, or “You saw this patient in {state}, where claims go to {payer}.” Press Switch to {payer}, or Choose a different Medicare payer to pick from Your practice is enrolled with or All Medicare Part B payers (“Choose the payer for the state where you saw the patient.”).
  3. Check the other claims it moves. The switch updates every unsent claim on the same Medicare policy (“This also updates 2 unsent claims on the same Medicare policy…”), and warns when one of them was a visit in another state.
  4. Read the result. For example “Switched this patient’s Medicare to {payer}. 1 held claim released to send.” Claims still held for another reason keep their hold note. The policy’s eligibility result is kept, and the claim’s history on the patient’s invoice shows that its Medicare payer was switched.

To let Hero do this for you, turn on Send Original Medicare claims to our Medicare contractor in the Medicare claims card, next to Default Medicare payer in Admin → External Providers → Stedi. It is off by default and needs the billing-settings permission: “When a patient’s Medicare names another state’s contractor, Hero switches the claim to yours and sends it. Hero only does this when it is clear which one is yours and nothing has gone to Medicare yet; otherwise the claim is held for you to review.”

Other Medicare rules Hero follows

  • Part B decides coverage. For Original Medicare, an eligibility answer with only Part A active shows as inactive coverage.
  • No replacement claims. Traditional Medicare takes no replacement (frequency 7) claims, so a correction is a reopening or a new claim; see Correct & Refile.
  • Split claims. When Medicare answers some lines on a separate notice, the claim reads Waiting for Medicare’s second notice and isn’t counted as underpaid in the meantime.
  • Medicare IDs. An Original Medicare policy needs an 11-character Medicare ID.
  • 99024 post-op visits. You can record them without a Medicare claim; see Expected denials and 99024 post-op visits.
5.32ERA enrollments

Catch payers with no electronic remittance, and read Stedi-started enrollments

A payer sends electronic payment notices (ERAs) only after the practice enrolls for them. Until then its payments arrive as paper EOBs that someone has to key in. Hero can watch for that gap, and the enrollment tracker now shows enrollments Stedi started on its own.

Turn on the ERA enrollment watch

  1. Open the switch. In Billing → Configuration → Claim Submission, below the claim settings, find Watch for missing ERA enrollments. Administrators and staff who may change billing settings can turn it on; others see “Someone who manages billing settings can change this.” It is off by default.
  2. Turn it on. “Once a day, Hero looks at the payers you sent claims to in the last 120 days. When one has never sent you an electronic payment notice (ERA) and no ERA enrollment is on file, the Billing inbox names the payer so someone can start its ERA enrollment before paper EOBs pile up. The alert closes itself when the first ERA arrives, or you can close it. Hero never enrolls for you.” Hero confirms ERA enrollment watch is on · Hero checks every morning.
  3. Work the alert. A Billing inbox item titled ERA enrollment needed: {payer} says which route needs the enrollment and where to start it, for example “Stedi needs an ERA enrollment for Blue Shield of California (payer ID BS001) before its payment notices arrive electronically. Start it in Admin → External Providers → Stedi (payer enrollments); until then post paper EOBs with Post EOB.” For Office Ally it points at Office Ally’s payer enrollment, and for Claim.MD at Admin → External Providers → Claim.MD.
  4. Let it close. The alert closes by itself, with a note, when that payer’s first ERA arrives or an ERA enrollment is on file. If you close it yourself it stays closed. Turning the watch off stops new alerts; alerts already in the inbox stay until someone closes them.
An alert is a reminder, not an enrollment. Hero never submits an enrollment for you. A payer counts as covered when an electronic remittance from it arrived through the same route in the last year, or an ERA enrollment for it is live or on the way in Stedi or Claim.MD. Paper EOBs you post yourself don’t count.

Enrollments Stedi started on its own

When Hero checks eligibility with a payer that requires enrollment first, Stedi can create an enrollment by itself, often with a task for the practice. The enrollment tracker (§5.21) now brings these in: opening the tracker, and its Refresh, ask Stedi for them.

  • Where it came from. Such a row and its details say Started automatically by Stedi after an eligibility check, Started automatically by Stedi, or Started in Stedi outside Hero.
  • Not used by Hero. An enrollment for an NPI Hero doesn’t send to that payer is marked Not used by Hero and never counts as Practice action, with the reason, for example “Hero checks this payer’s eligibility under your practice’s group NPI, not this provider’s NPI, so Hero does not use this enrollment. Nothing is needed from your practice.” Its tasks are listed as Steps Stedi lists (not needed). A Not used by Hero filter appears next to the other groups when there is at least one.
  • When Hero can’t tell. “Hero could not confirm which NPI it sends to this payer; review the practice’s billing identity.”

Other enrollment changes

  • PTAN on ERA enrollments. Medicare contractors need the PTAN on ERA enrollments as well as claims enrollments, so the enrollment form in Admin → External Providers → Stedi now shows PTAN for both. Eligibility enrollments still don’t take one.
  • The environment stays Production. Once a practice has live Stedi provider records, the Stedi settings’ environment is locked: “Stays Production: this practice has live Stedi provider records.” Switching such a practice to Test would stop its ERAs from arriving, so Hero refuses it.
5.35Member ID & group number

Fix a claim whose member ID and group number are the same

The member ID identifies the patient and the group number identifies the plan, so the two are never the same. When one value ends up in both fields of a policy (often the card’s group number typed into Member ID as well), Stedi refuses the claim. Hero catches this before the claim is sent, and Billing Hero can correct the policy from the payer’s own eligibility answer. Hero ignores spaces, dashes and capital letters when it compares the two fields, so ABC-123 456 and abc123456 count as the same.

What you see

  • A warning on the claim. The claim’s Issues & fixes shows Member ID and group number are the same: “This insurance policy has the same value as its member ID and its group number. The member ID identifies the patient and the group number identifies the plan, so one of them is wrong, and Stedi rejects the claim. Correct it from the insurance card or the payer’s eligibility answer.” Every practice sees this warning, whatever its claims route.
  • A hold, when your practice sends claims only through Stedi. The claim isn’t sent. It waits in Claims Pipeline → Ready to Send → Held, marked Held · Awaiting review, with the note “Held before sending: this claim’s insurance policy has the same value as its member ID and its group number, which the clearinghouse rejects (the subscriber ID, NM1-09, and the group or policy number, SBR-03, must differ). Correct the member ID or the group number from the insurance card or the payer’s eligibility answer.” A claim that is already on another hold keeps that hold instead.
  • No hold, when your practice also has another claims channel. Hero doesn’t hand the claim to Stedi; it goes by your other channel, as any claim Stedi can’t take does.
  • A claim Stedi already refused reads Submission failed on the Action Center’s Rejected lane, with Stedi’s own words: “33: The Subscriber Primary Identifier (NM1-09) and Subscriber Group/Policy Number (SBR-03) should not be the same. Correct and resubmit.” (see the claims pipeline). A payer can also turn a claim back because the member ID is invalid or too long; Billing Hero handles that the same way.

Clear the hold

  • Through Billing Hero. When the policy is corrected through Billing Hero (below), the hold comes off on its own, on every unsent claim on that policy, and the claim then goes out with your practice’s normal sending. Only this hold is released; any other hold stays.
  • Releasing it yourself. Release in Held takes the hold off, but while the policy still has the same value in both fields Hero holds the claim again the next time it would be sent (and, with Billing Hero on, sends it the problem again).
  • Correcting the policy yourself. Once a policy has a claim, Edit policy won’t change its member ID or group number and asks for a new policy instead. If your practice doesn’t use Billing Hero, contact Hero support to correct the policy and its held claim.

What Billing Hero does

Billing Hero works these claims when it is on and the matching switch under What sends a problem to Billing Hero is on: A claim was held before sending for the hold, and A claim was rejected before the payer processed it for a claim Stedi or the payer turned back over the member ID or group number. It also needs Ask the payer about corrected details on and Correct the insurance set to Propose or Automatic.

  1. It asks the payer about the policy as it is. It checks eligibility for the claim’s date of service with the policy exactly as it is now. When the payer confirms coverage, its answer includes the member ID and the group number the payer has for this member. The check is listed in the policy’s eligibility history and doesn’t change the policy.
  2. It corrects the policy to the payer’s numbers. With Correct the insurance it sets the member ID and the group number from the payer’s answer, or clears the group number when the payer returned none. The policy and its unsent claims are corrected together, and eligibility is checked again.
  3. It sends the same claim again. With Send a claim again the claim goes out again as a fresh send. The payer never had it, so this is not a corrected claim and not a Correct & Refile.

The payer’s own answer confirms the new details. So with How Billing Hero works set to Automatic and these actions set to Automatic, all of this happens without anyone. Otherwise each change waits in Waiting for approval and on the problem’s Billing Queue item. The card reads Correct the insurance with The payer confirmed these details, the Member ID and Group number it would set ((cleared) when it removes the group number), and “Corrects the policy and its unsent claims together (none reached the payer).” Approving the correction takes a held claim off this hold. A claim Stedi or the payer turned back still has to be sent again: approve Billing Hero’s Send the claim again change if it proposed one, or send the claim yourself.

What Billing Hero never does here

  • It never makes up a number. It sets only a group number the payer returned or a card on file shows (or clears it), and a policy change the payer didn’t confirm always waits for a person.
  • It corrects a policy only while no claim on it has reached the payer. When one has, or when the payer doesn’t confirm coverage or returns nothing different, it hands the problem to the Billing Queue with what it found.
  • It doesn’t take this hold off with Release its own holds: Hero placed it, not Billing Hero. Correcting the policy is what releases it.
  • It uses these steps only on a claim whose policy has the same value in both fields, or whose rejection names the member ID or group number. Other rejections are worked as before.

On the Billing Queue item

  • What it changed on its own. When Billing Hero makes a change by itself and the problem already has an open Billing Queue item, the item gets a note naming each change, with a member ID or group number shown only by its last four characters, for example “Billing Hero made these changes on its own: Correct the insurance (member ID changed from one ending 0001 to one ending 1234; group number cleared (was ending 0001)); Send the claim again.”
  • Closing by itself. After a person approves sending the claim again, the item waits on Payer’s acknowledgment of claim {number} (What we’re waiting on). An item Billing Hero filed about the claim closes once the claim went out again and the payer acknowledged or accepted it, whoever fixed it: “Closed automatically: claim {number} went out again and reached the payer (now acknowledged). Nothing else is left on this item.” It then reads Resolved · Claim resubmitted (an item about a held claim reads Resolved · Released the hold). An item a person is working only gets a note and stays open.
Prevent it at the front desk. On the patient’s Insurance tab, type the card’s member (or subscriber) ID in Member ID and the plan’s group number in Group, which is optional. Leave Group empty rather than repeat the member ID.

Need help? Email support@heroemr.com.